Owens Corning Home Energy Audit Nationwide

Owens Corning Home Energy Audit in Cupertino: What to Know First

We provide independent Owens Corning home energy audit in Cupertino, typically scheduling within 48 hours and completing most audits same-day. Every audit begins with a written price - no work starts without it - and ends with a Documented Photo Record plus before-and-after blower-door numbers when air sealing is part of the scope. This page is for Owens Corning owners in Cupertino who want to understand why their insulation isn’t performing and what the fix actually costs. Call (831) 217-8521 for a free estimate or a free second opinion on any written estimate you’ve already received.

Call (831) 217-8521

How Owens Corning Products Fail - and How We Fix Them

• Owens Corning AttiCat blown-in fiberglass settles below labeled R-value in older Cupertino tract homes. The Rancho Rinconada and Monta Vista neighborhoods are full of 1960s-1980s attics where AttiCat was blown to R-38 depth but has compressed to R-30 or lower. We measure actual depth, calculate settled density, and recommend either top-off or full removal and re-installation with proper air sealing underneath.
• Owens Corning EcoTouch batts degrade at top plates where attic bypasses blow conditioned air through the fiberglass. The batt itself is fine; the problem is the gap between the top plate and drywall that was never sealed. In Cupertino’s older split-levels backing up to the foothills, we regularly find these bypasses dumping heated air into the attic. We seal with fire-rated caulk and foam, then reinstall or replace the batt.
• Owens Corning FOAMULAR rigid foam boards delaminate in crawl spaces with seasonal moisture swings. Cupertino’s winter rains and summer dry spells create humidity cycling that breaks the bond between FOAMULAR faces. We document the delamination, assess whether the assembly can be salvaged, and specify replacement or supplemental encapsulation with a vapor barrier.
• Owens Corning PINK Next Gen Fiberglass loses effectiveness when installed over unsealed can lights and plumbing penetrations. The fibers don’t stop air movement; they filter it. We’ve pulled back PINK insulation in Cupertino homes to find black streaks where attic air was washing through for years. Our fix: seal every penetration with fire-rated materials, then reinstall or upgrade the insulation.
• Owens Corning ProCat loose-fill creates thermal bypasses around attic hatches and kneewalls that were never dammed or sealed. The insulation performs to spec where it’s thick and undisturbed, but the hatch itself is “just a polite hole in your ceiling.” We build insulated dams, weatherstrip the hatch, and treat the kneewall as part of the thermal boundary, not an afterthought.

Our Owens Corning Home Energy Audit Process

1. 1
   Schedule and written price. You call (831) 217-8521, a live person answers, and we book a time. Wes Okafor or one of our technicians arrives with a written scope and price before any diagnostic work begins - Haven Standard Clause 1.
2. 2
   Blower-door test and thermal imaging. We depressurize the house to 50 pascals and record the CFM50 reading - a single number showing how leaky the envelope is. The infrared camera then maps where that air is moving through Owens Corning insulation that should be stopping it.
3. 3
   Insulation inspection and R-value verification. We probe actual depth, check for settling or moisture damage, and identify whether the Owens Corning product was installed per manufacturer spec or compromised by gaps, compression, or thermal bridging.
4. 4
   Duct leakage test if applicable. Many Cupertino homes with Owens Corning attic insulation also have ductwork running through the same conditioned space. We pressurize the ducts and measure leakage to the outside, since leaky ducts undo insulation gains.
5. 5
   Written report with photo documentation and recommendations. You receive a Documented Photo Record, the blower-door number, thermal images with annotations, and a scope of work with fixed pricing for any repairs. If we performed air sealing, you also get the post-work blower-door reading showing the improvement.
6. 6
   365-Day Done Right Promise. If the work doesn’t perform as specified, we make it right. The warranty is in writing, delivered before anyone starts.

Before

After

What Owens Corning Home Energy Audit Costs in Cupertino

Most Owens Corning home energy audits in Cupertino run between $350 and $650 for a single-family home under 2,500 square feet. The price moves based on what we test: a blower-door test with thermal imaging starts around $350; adding duct leakage testing pushes toward $550; crawl space inspection with moisture readings reaches the top of that range. Homes over 3,000 square feet or with multiple HVAC zones typically run $650 to $950.

If the audit reveals needed air sealing, most Cupertino attic sealing jobs run $1,800 to $3,400 for a home this size. Full Owens Corning insulation removal and replacement with proper air sealing typically runs $4,500 to $8,500 depending on square footage and access difficulty. We also offer a free second opinion on any written estimate you’ve received from another contractor - bring us their scope and we’ll read it with you.

Call (831) 217-8521 for a free estimate. Estimates are free. Written prices are fixed.

Why Cupertino Homeowners Call Topside Attic Insulation Cupertino for Owens Corning Work

We’ve completed jobs from tract homes near Rancho Rinconada to older split-levels in the Cupertino foothills - the kind where original attic bypasses were never sealed before the blown-in cellulose went down. Our crew is background-checked and uniformed, and every applicable job publishes before-and-after blower-door numbers so you can verify the air-sealing result yourself. We source Owens Corning materials alongside Johns Manville, Knauf, Rockwool, and others - no proprietary lock-in means we specify what’s right for your assembly, not what’s in our warehouse. Calls are answered by a live person 24/7. The 365-Day Done Right Promise applies to everything we complete.

FAQs