Reflectix Insulation Service Nationwide

Why Cupertino Homeowners Choose Reflectix Insulation

We provide Reflectix in Cupertino, from Monta Vista to the older ranch homes near Rancho Rinconada. Our crew installs, repairs, and replaces Reflectix radiant barrier products with OEM-compatible parts and warranty-safe practices, and every job starts with a written price before any work begins. Call (831) 217-8521 for a free estimate.

Call (831) 217-8521

Reflectix radiant barrier is a foil-faced insulation system, typically aluminum bonded to polyethylene bubble layers or woven scrim, designed to block radiant heat transfer rather than slow conduction like fiberglass or cellulose. In Cupertino’s sun-baked attics, where roof deck temperatures regularly exceed 150°F in July and August, a properly installed barrier can cut radiant heat gain by 95% or more, which is why many homeowners pair it with Attic Insulation services. That matters here because PG&E’s tiered rates punish every extra kilowatt-hour, and many Cupertino homes run their AC into September when the Santa Cruz Mountains trap afternoon heat.

We’re not affiliated with or authorized by Reflectix. We’re an independent service provider, which means we can tell you honestly when a Reflectix product is the right fix, when it’s overkill, or when the real problem is an unsealed attic bypass that no radiant barrier will solve. Seal the leaks first. Insulation covers problems; it does not fix them.

Why Trust Topside Attic Insulation Cupertino for Your Reflectix Insulation?

Wes Okafor, our owner, learned the trade at Olive-Harvey College in Chicago, where the building science program was running blower-door diagnostics before most contractors in the Midwest knew what one was. He’s spent the better part of two decades doing insulation work across the South Bay, and our crew has completed jobs everywhere from tract homes near Rancho Rinconada to older split-levels backing up to the Cupertino foothills, with Reflectix service in Los Altos available as well. The kind of houses where the original attic bypasses, gaps where interior walls meet the ceiling plane, were never sealed before the blown-in cellulose went down.

We know Reflectix products specifically because we’ve pulled enough of them out of Cupertino attics to understand how they fail. We’ve seen Double Reflective Insulation Rolls (BP24010) delaminate after years of heat cycling. We’ve documented dust accumulation on Reflective Foil Insulation (ST16025) that cut performance by a third. We carry genuine Reflectix replacement rolls and compatible fasteners on our trucks, and we know which perforated versus non-perforated products work with Cupertino’s specific ventilation profiles.

Every applicable job gets before-and-after blower-door numbers. You get a written scope, a written warranty, and a Documented Photo Record. Under our 365-Day Done Right Promise, if it’s not done right, we make it right. That’s Haven Standard Clause 1: Have it in writing.

Common Reflectix Insulation Problems We Fix in Cupertino

• Foil layer delamination from the bubble core. The Reflectix Double Reflective Insulation Roll (BP24010) uses polyethylene bubbles laminated between aluminum foil sheets. In Cupertino attics, where roof deck temperatures spike above 150°F for four to five months annually, that adhesive breaks down. The foil separates, bubbles collapse, and the material becomes a crinkled sheet with almost no R-value. We see this most often in west-facing attics above Monta Vista, where afternoon sun exposure is brutal.
• Surface dust accumulation and oxidation. Reflectix Reflective Foil Insulation (ST16025) depends on a shiny, low-emissivity surface to reflect radiant heat. After five to ten years in a Cupertino attic, dust from vented soffits and oxidation from humidity dull that surface. We’ve measured emissivity degradation that cuts radiant barrier performance by up to 40%. The material still looks intact, but it’s not doing its job.
• Moisture trapped between Reflectix and roof deck. Non-perforated Reflectix installed directly against roof sheathing, especially in Cupertino’s cooler western foothills neighborhoods, traps winter condensation. The foil acts as a vapor barrier on the wrong side. We’ve found mold growth and early-stage wood rot in attics near Stevens Creek where previous installers never accounted for the micro-climate difference between hillside and flatland Cupertino.
• Improper installation with gaps or compression. Reflectix Radiant Barrier Roof Decking (RB48125) needs an air gap of at least 3/4 inch between the foil and the roof deck to function. Stapled tight to rafters with no standoff, it becomes a conductor, not a reflector. Compression against insulation below creates thermal bridging. Gaps between sheets let convection loops form. We find all three mistakes regularly in Cupertino’s 1960s ranch homes, where DIY installations or cut-rate contractors treated radiant barrier like wallpaper.
• Duct wrap degradation in unconditioned spaces. Reflectix Duct Insulation Wrap (DW12025) on HVAC ducts in vented Cupertino attics suffers tape failure and seam separation after years of temperature swing. The wrap itself holds up, but the adhesive-backed tape that seals the longitudinal seam dries out. Conditioned air leaks into the attic before it reaches the register, and the homeowner pays PG&E for the privilege.

Before

After

Reflectix Parts & Our Repair-vs-Replace Approach

We stock genuine Reflectix replacement rolls, compatible fasteners, and perforated radiant barrier alternatives on our Cupertino-area trucks, and we also offer Reflectix repair in Saratoga. For repairs, we match the existing product line when possible. A torn section of Double Reflective Insulation with intact surrounding material gets patched with matching foil tape and a reinforcing layer, not a full tear-out. Dusty but structurally sound Reflective Foil Insulation can sometimes be cleaned and re-stapled with proper standoff hardware.

When replacement is necessary, we often recommend upgrading to perforated radiant barrier for Cupertino’s mixed-humidity attics. The perforations let moisture escape, eliminating the trapped-condensation problem we see in hillside homes. We also evaluate whether your attic ventilation, ridge vents, soffit baffles, is adequate before installing new material. New Reflectix on a poorly ventilated attic is money spent twice.

We don’t sell products we don’t believe in, and we don’t replace what can be repaired. Call (831) 217-8521 for a free estimate, and we’ll show you exactly what we found in your attic.

Our Reflectix Service Process - Step by Step

1. 1
   Diagnosis with documentation. We inspect your existing Reflectix installation, measure attic temperature at multiple points, and photograph all findings. If air sealing is applicable, we run a blower-door test to establish your baseline ACH50, air changes per hour at 50 pascals of pressure. You get these numbers in writing before we quote any work.
2. 2
   Repair or install with warranty-safe practices. We use OEM-compatible Reflectix products and installation methods that won’t void any remaining manufacturer warranty. For new installs, we ensure proper air gaps, ventilation compatibility, and no compression against existing insulation. Sealing comes first if we find bypasses, can light gaps, or top plate leaks.
3. 3
   Performance verification. On applicable jobs, we re-run the blower-door test and take post-installation attic temperature readings. The before-and-after numbers go in your documented report. No guesswork.
4. 4
   Written warranty and photo record. You receive a written scope of work, product specifications, installation photos, and our 365-Day Done Right Promise in writing. Haven Standard: Have it in writing.

Reflectix Products We Service & Install in Cupertino

We work with the full Reflectix residential line: Double Reflective Insulation Roll (BP24010) for attic floor and wall applications; Reflective Foil Insulation (ST16025) for radiant barrier retrofit; Radiant Barrier Roof Decking (RB48125) for rafter-level installation with proper standoff; and Duct Insulation Wrap (DW12025) for HVAC ductwork in unconditioned spaces. We stock BP24010 and ST16025 on our trucks for same-day repair in most of Cupertino. RB48125 and specialized perforated alternatives typically require a one-day order, which we coordinate so there’s no second trip charge.

We Also Service These Brands

We’re not a single-brand shop. Our crews install and repair Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber products. That breadth matters because many Cupertino homes need hybrid systems, radiant barrier plus blown-in cellulose, or spray foam at the roofline with Reflectix at the rafters. We recommend what performs, not what we have a quota to move.

FAQs - Reflectix Insulation Service in Cupertino

Is Topside Attic Insulation Cupertino authorized by Reflectix?

No. We are an independent Reflectix service provider with no manufacturer affiliation. This lets us give unbiased recommendations about whether Reflectix is right for your specific attic conditions, ventilation setup, and budget. We use OEM-compatible parts and warranty-safe installation practices. For questions about manufacturer warranties, we direct you to Reflectix directly.

Do you use genuine Reflectix/OEM parts?

We use genuine Reflectix replacement rolls and factory-specified compatible fasteners for repairs. When upgrading or replacing, we may recommend perforated radiant barrier alternatives that perform better in Cupertino’s humidity conditions. We always disclose exactly what product we’re installing and why.

How long does Reflectix service take?

Most repairs, patching, cleaning, and reinstallation, take two to four hours. Full attic replacement with air sealing and ventilation corrections typically requires a full day. We give you a written time estimate with your written price before any work starts. Same-day service is often available in Cupertino; call (831) 217-8521 to check current scheduling.

What Reflectix models/series do you cover?

We service and install Double Reflective Insulation Roll (BP24010), Reflective Foil Insulation (ST16025), Radiant Barrier Roof Decking (RB48125), and Duct Insulation Wrap (DW12025). If you have a discontinued or specialty Reflectix product, we’ll evaluate it on site and advise honestly whether repair is practical.

Will service void my Reflectix warranty?

We follow installation practices that comply with Reflectix’s published guidelines, which protects any remaining manufacturer warranty. Alterations outside those guidelines, like installing non-perforated barrier against a roof deck without ventilation, are what typically void coverage. We document our methods so you have a record.

How much does Reflectix insulation cost in Cupertino?

Repair and patching typically runs $400-$900 depending on attic accessibility and material extent. Full replacement with proper air sealing and ventilation corrections in a standard Cupertino ranch home generally falls between $2,200 and $4,800. Hillside homes with complex rooflines or limited access may run higher. We provide a flat, written price before any work starts, no exceptions. Call (831) 217-8521 for a free estimate, estimates are free.

Does Reflectix radiant barrier really work in Cupertino’s climate?

Yes, but with caveats. Cupertino’s mild Mediterranean climate still produces intense attic heat loads, 150°F+ roof decks, for four to five months. Reflectix blocks radiant heat transfer effectively when properly installed with adequate air gaps and ventilation. It does not replace conductive insulation like fiberglass or cellulose; it complements it. In west-facing Cupertino attics, we’ve documented 15-20°F temperature reductions after proper Reflectix installation.

How do I know if my Reflectix radiant barrier needs replacement?

Visible delamination, foil that separates from the bubble core, is the clearest sign. Dull, dusty, or oxidized surfaces that no longer reflect light indicate degraded performance. Musty odors or mold spots near the roof deck suggest trapped moisture. If your AC runs longer than it used to and your attic feels like a furnace by 2 PM in July, the barrier is likely compromised. We inspect and document all of this at no charge.

Can Reflectix be installed over existing attic insulation?

Reflectix radiant barrier belongs at the rafters or roof deck, not on top of floor insulation. Laying it over blown-in cellulose or fiberglass creates compression, eliminates the required air gap, and can trap moisture. The correct configuration in a vented Cupertino attic is: sealed ceiling plane, floor insulation to full R-value, then radiant barrier at rafters with standoff and proper ventilation above.

What’s the difference between Reflectix radiant barrier and traditional insulation?

Traditional insulation, fiberglass, cellulose, foam, slows conductive heat flow, heat moving through solid materials. Reflectix blocks radiant heat transfer, infrared energy across open spaces. In a Cupertino attic, both matter: radiant barrier stops the roof deck from re-radiating heat downward, while floor insulation keeps conditioned air from escaping through the ceiling. One does not replace the other.

Do you repair or replace damaged Reflectix radiant barrier?

We repair when it’s cost-effective: patching tears, cleaning and re-stapling with proper hardware, replacing failed tape seams on duct wrap. We replace when delamination is widespread, mold has compromised the substrate, or the original installation was so incorrect that remediation costs more than starting fresh. We show you photos and explain both options with written prices for each.

Book Your Reflectix Service in Cupertino, CA

Call (831) 217-8521 to schedule your free estimate. A live person answers 24/7. We’ll inspect your attic, document what we find, and give you a written price before any work starts. Every job gets a Documented Photo Record and our 365-Day Done Right Promise in writing.

Written by Wes Okafor, Owner at Topside Attic Insulation Cupertino, serving Cupertino since 2016.